Oval Formats

M313 | OVAL FORMAT MOULD IN TOPS

Stainless Steel Moulds AISI 304L. Spring AISI 302. Ergonomic handle. 100 % Internal Welded Finishing: pickled and passivated.

M325 | OVAL SHAPED MOULD

Stainless Steel Moulds AISI 304L. Spring AISI 302. Ergonomic handle. 100 % Internal Welded Finishing: pickled and passivated.

M326 | OVAL SHAPES MOULD

Stainless Steel Moulds AISI 304L. Spring AISI 302. Ergonomic handle. 100 % Internal Welded Finishing: pickled and passivated.

M327 | MANDOLIN SHAPED MULD

Stainless Steel Moulds AISI 304L. Spring AISI 302. Ergonomic handle. 100 % Internal Welded Finishing: pickled and passivated.

M350 | BARREL SHAPED MOULD

Stainless Steel Moulds AISI 304L. Spring AISI 302. Ergonomic handle. 100 % Internal Welded Finishing: pickled and passivated.

Curved base format

M332 | BALL SHAPED MOULD

Stainless Steel Moulds AISI 304L. Spring AISI 302. Ergonomic handle. 100 % Internal Welded Finishing: pickled and passivated.

M353 | BARREL SHAPED MOULD

Stainless Steel Moulds AISI 304L. Spring AISI 302. Ergonomic handle. 100 % Internal Welded Finishing: pickled and passivated.

Special Formats

M410 | MOLDE CHULETA

Stainless steel mold AISI 304L. AISI 302 springs. Ergonomic design crossbar with built-in nuts. Continuous internal welding. Finishing: pickling and passivation.

M360 | VIRGINIA STYLE MOULD

Stainless steel mold AISI 304L. AISI 302 springs. Built-in nuts and ergonomic grip. Base stamped in one piece, without welds or right angles. Finishing: pickling and passivation.

M413 | CHIKEN FORMAT MOULD

Stainless steel mold AISI 304L. AISI 302 springs. Ergonomic design crossbar with built-in nuts. Continuous internal welding. Finishing: pickling and passivation.

M354 | BARREL MOULD WITH ROUNDED LID AND BASE

Stainless steel mold AISI 304L. AISI 302 springs. Built-in nuts and ergonomic grip. Base stamped in one piece, without welds or right angles. Finishing: pickling and passivation.

Rectangular Format

M330 | ROLLED SHAPED MOULD

Stainless Steel Moulds AISI 304L. Spring AISI 302. Ergonomic handle. 100 % Internal Welded Finishing: pickled and passivated

M380 | ROLLED SHAPED MOULD WIDE

Stainless Steel Moulds AISI 304L. Spring AISI 302. Ergonomic handle. 100 % Internal Welded Finishing: pickled and passivated

M386 | RECTANGULAR SHAPED MOULD, STAMPED

Stainless steel mold AISI 304L. AISI 302 springs. Built-in nuts and ergonomic grip. Base stamped in one piece, without welds or right angles. Finishing: pickling and passivation.

M384 | RECTANGULAR MOULD WITH ROUNDED ENDS

Stainless steel mold AISI 304L. AISI 302 springs. Continuous internal welding. Ergonomic design crossbar with built-in nuts Termination: pickling and passivation Welded mold base with drain hole. Internal conicity of 2% to favor the demolding. False fund to expel the piece.-

M355 | TUNNEL SHAPED MOULD

Stainless steel mold AISI 304L. AISI 302 springs. Ergonomic design crossbar with built-in nuts. Continuous internal welding. Finishing: pickling and passivation.

M362 | RECTANGULAR SHAPED MOULD, FLAT

Stainless steel mold AISI 304L. AISI 302 springs. Built-in nuts and ergonomic grip. Die-cut and folded base. 100% continuous and sanitary welding internally and externally. Ideal for sliced ​​by its angles with small radius.

M387 | RECTANGULAR SHAPED MOULD, STAMPED

Stainless steel mold AISI 304L. AISI 302 springs. Built-in nuts and ergonomic grip. Base stamped in one piece, without welds or right angles. Finishing: pickling and passivation.

Vertical Format

M390 | SQUARE SHAPES MOULD (VERTICAL)

Stainless steel mold AISI 304L. Complexes AISI 302 .. Continuous internal welding. Ergonomic design crossbar with built-in nuts Termination: pickling and passivation Mold base welded with the drain hole. Internal conicity of 2% to favor the demolding. Fund for the expulsion of the piece.-

M392 | OBLONG SHAPES MOULD (VERTICAL)

Stainless steel mold AISI 304L. Complexes AISI 302 .. Continuous internal welding. Ergonomic design crossbar with built-in nuts Termination: pickling and passivation Mold base welded with the drain hole. Internal conicity of 2% to favor the demolding. Fund for the expulsion of the piece.-

M395 | RECTANGULAR SHAPED MOULD (VERTICAL)

Stainless steel mold AISI 304L. Complexes AISI 302 .. Continuous internal welding. Ergonomic design crossbar with built-in nuts Termination: pickling and passivation Mold base welded with the drain hole. Internal conicity of 2% to favor the demolding. Fund for the expulsion of the piece.-